# base config for Bambu Lab A1 style printer (approximate for estimation)
# Save as config.ini

# MACHINE SETTINGS
bed_shape = 0x0,256x0,256x256,0x256
nozzle_diameter = 0.4
filament_diameter = 1.75
max_print_speed = 500
travel_speed = 700
gcode_flavor = klipper
# Bambu uses specific gcode but klipper/marlin is close enough for time est if accel matches
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_e = 6000
machine_max_acceleration_extruding = 6000

# PRINT SETTINGS
layer_height = 0.2
first_layer_height = 0.2
perimeters = 2
fill_density = 15%
fill_pattern = grid
solid_layers = 3
top_solid_layers = 3
bottom_solid_layers = 3

# SPEED SETTINGS (Conservative defaults for A1)
perimeter_speed = 200
external_perimeter_speed = 200
infill_speed = 250
solid_infill_speed = 200
top_solid_infill_speed = 150
support_material_speed = 150
bridge_speed = 150
gap_fill_speed = 50

# FILAMENT SETTINGS
filament_density = 1.24
filament_cost = 18.0
filament_max_volumetric_speed = 15
temperature = 220
bed_temperature = 65